Gedge Systems - Industrial Weighing Equipment

> Batch Controllers

> GS2100 Digital Weight Indicator & Dual Setpoint Controller

GS2100 Digital Weight Indicator & Dual Setpoint Controller




» Display resolution to 1 in 10,000
» Bright 14mm 6 Digit Red LED display to 199,990
» Full Digital Setup and Keyboard Calibration
» Can be Calibrated in ANY Units kg, t, lb, g, N, kN etc
» Two Programmable Setpoints
» 2 Optically Isolated Open Collector Outputs
» Excitation Sense designed for Accurate operation through Intrinsic Safety Barriers
» 10VDC Excitation for up to 8 x 350Ohm Load Cells
» High Accuracy and High Thermal Stability
» All Units 100% Tested for Accuracy & Thermal Stability


» High and Low Level Silo/Bin detection
» Silo weighing
» Hopper weighing
» Tank Weighing
» Force Measurement with Settable Force Limits
» PLC/SCADA Weighing Interface

Option Cards:

Option06 Analog Output 12 bit Accuracy (1 in 4,096) 4-20mA & 0-10VDC
Option06HP Analog Output 14 bit Accuracy (1 in 16,384) 4-20mA & 0-10VDC


SE02 Factory Fitted into our Stainless Steel Enclosure for HIGH PRESSURE HOSE DOWN IP68 Protection
Option04 Panel Mount Clamps
Quality batch controllers | Digital weight indicators | Summing units | Load cells | Remote displays